资料介绍
全差动放大器组件计算器:FilterPro™ Multiple Feedback (MFB) and Sallen-Key Design Program is a Windows application. This application designs MFB and Sallen-Key low-pass and high-pass filters using Voltage Feedback Op Amps, resistors and capacitors. It also supports a fully-differential version of the MFB circuit. This program includes Bessell, Butterworth, Chebychev, and linear phase filter types and can be used to design filters from 1 to 10 poles. The capacitor values in each stage can be either selected by the computer or entered by the designer. An "always on" prompt window provides context-sensitive help information to the user. The response of the filter is displayed on a graph, showing gain, phase and group delay over frequency.
A new version of FilterPro is now available, Version 2.0, that includes band-pass, notch, wide-band-pass, and band-reject circuits.
The FilterPro V2.0 band-pass circuit is based on the MFB circuit. Because the band-pass filter is most often used for tone detection and high Q filters usually need high gain, a method was found to make the gain equal to the Q of the filter. When this is done the sensitivity to variation of the passive components is reduced allowing for a more reproducible filter.
The FilterPro V2.0 notch circuit is a dual amplifier circuit whose sensitivity to variation of passive components is also reduced compared to the traditional twin-T circuit. This filter is often used to block specific tones such as 60 Hz, 120 Hz, 1kHz, etc.
The FilterPro V2.0 wide-band-pass filter uses a high-pass filter cascaded with a low-pass filter. This is very useful for band-pass filters with a Q of less than 1 because the passband response is easily made flat and because the filter types such as Bessell, Butterworth, etc. are used.
The FilterPro V2.0 band-reject filter uses a high-pass filter summed with a low-pass filter. This is useful to block a wide band of frequencies. It is also useful if the gain above the blocked band of frequencies is desired to be different than the gain below the blocked band.
- AMC1100全差动隔离放大器数据表
- 差动放大器和电流检测放大器
- 低功耗全差动可编程增益放大器参考设计
- 扩展全差动放大器的轨到轨输出范围以包括真正零电压
- 单电源全差动放大器驱动ADC
- MT-068:差动放大器和电流检测放大器
- AD8208:高压精密差动放大器
- ADL5561 差动放大器参考设计
- ADL5565 差动放大器参考设计
- 差动放大器的Multisim仿真实例模电原理图免费下载 45次下载
- 计算器和差动放大器的电源图详细资料免费下载 17次下载
- 高共模电压差动放大器 22次下载
- 差动放大器应用 18次下载
- 单电源全差动放大器驱动ADC 1次下载
- 差动放大电路与集成运算放大器测试习题
- 如何构建简单的台式放大器 652次阅读
- 全差分放大器的评估 1358次阅读
- 调整固定增益差动放大器的增益 1763次阅读
- 具有精密电源基准电平转换的高性能差动放大器 547次阅读
- 深入了解差动放大器 2247次阅读
- 差动放大器的特性,差动放大器恒流源的作用 1.3w次阅读
- 低功耗全差动放大器THS452x系列的特点及应用范围 1466次阅读
- 技术 | 内置增益设置电阻的放大器与分立差动放大器的区别 3655次阅读
- 传统差动放大器的缺点及解决方案 7759次阅读
- 电阻的放大器与分立差动放大器有什么区别 4492次阅读
- 如何利用差动放大器和运算放大器实现低成本精密电流源 7592次阅读
- 差分放大器的原理,和差分放大器的应用 2.1w次阅读
- 什么是差动放大器?详细解析差动放大电路 4.1w次阅读
- 从生产设计出发谈谈差动放大器的不足 2234次阅读
- 几个经典差动放大器应用电路详解 9.5w次阅读
下载排行
本周
- 1电子电路原理第七版PDF电子教材免费下载
- 0.00 MB | 1490次下载 | 免费
- 2单片机典型实例介绍
- 18.19 MB | 92次下载 | 1 积分
- 3S7-200PLC编程实例详细资料
- 1.17 MB | 27次下载 | 1 积分
- 4笔记本电脑主板的元件识别和讲解说明
- 4.28 MB | 18次下载 | 4 积分
- 5开关电源原理及各功能电路详解
- 0.38 MB | 10次下载 | 免费
- 6基于AT89C2051/4051单片机编程器的实验
- 0.11 MB | 4次下载 | 免费
- 7蓝牙设备在嵌入式领域的广泛应用
- 0.63 MB | 3次下载 | 免费
- 89天练会电子电路识图
- 5.91 MB | 3次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 2PADS 9.0 2009最新版 -下载
- 0.00 MB | 66304次下载 | 免费
- 3protel99下载protel99软件下载(中文版)
- 0.00 MB | 51209次下载 | 免费
- 4LabView 8.0 专业版下载 (3CD完整版)
- 0.00 MB | 51043次下载 | 免费
- 5555集成电路应用800例(新编版)
- 0.00 MB | 33562次下载 | 免费
- 6接口电路图大全
- 未知 | 30320次下载 | 免费
- 7Multisim 10下载Multisim 10 中文版
- 0.00 MB | 28588次下载 | 免费
- 8开关电源设计实例指南
- 未知 | 21539次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935053次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537791次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233045次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191183次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183277次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138039次下载 | 免费
评论
查看更多