华为交换机如何批量清除接口配置信息

环境：

华为S5735S-S24T4S-A
Software Version V200R019C10SPC500

问题描述：

华为交换机如何批量清除接口配置信息

解决方案：

1.单接口下清除

系统试图下

sy

[Huawei]clearconfigurationinterfaceGigabitEthernet0/0/1（清除0/0/1口配置）

Warning:Allconfigurationsoftheinterfacewillbecleared,anditsstatewill
beshutdown.Continue?[Y/N]:y

[Huawei]intGigabitEthernet0/0/1
[Huawei-GigabitEthernet0/0/1]disthis
shutdown
因清除接口下的配置后为shuadown(关闭)状态
[Huawei-GigabitEthernet0/0/1]undoshutdown开启接口

#
return

接口下

[HW1730s-GigabitEthernet0/0/49]clearconfigurationthis
Warning:AllconfigurationsoftheinterfaceGigabitEthernet0/0/49willbecleared,anditsstatewillbeshutdown.Continue?[Y/N]:y.
Info:Total2command(s)executed,2successful,0failed.
[HW1730s-GigabitEthernet0/0/49]
May2120220130HW1730sDS/4/DATASYNC_CFGCHANGE:OID1.3.6.1.4.1.56813.5.25.191.3.1configurationshavebeenchanged.Thecurrentchangenumberis19,thechangeloopcountis0,andthemaximumnumberofrecordsis4095.
[HW1730s-GigabitEthernet0/0/49]disth
#
interfaceGigabitEthernet0/0/49
shutdown
#

2.多接口统一清除

先建端口组，将端口批量加入端口组

[HUAWE]port-group1
[HUAWEI-port-group-1]group-memberGigabitEthernet0/0/3toG0/0/6

在端口组下undo现有配置即可
[HUAWEI-port-group-1]undopl
[HUAWEI-port-group-1]undopd

审核编辑：汤梓红