具有 16V/10V UVLO、温度范围为 0°C 至 70°C 的 6kHz 至 220kHz CCM PFC 控制器
| Topology | Boost |
| Control mode | CCM |
| Practical operating frequency (Max) (MHz) | 0.25 |
| UVLO thresholds on/off (V) | 16/10 |
| Device type | Controllers |
| Features | > 750W Applications, Average Current Mode, Continuous Control Mode , Enable, OVP |
| Rating | Catalog |
| Operating temperature range (C) | 0 to 70 |
- Controls Boost Preregulator to Near-Unity Power Factor
- Limits Line Distortion
- World Wide Line Operation
- Over-Voltage Protection
- Accurate Power Limiting
- Average Current Mode Control
- Improved Noise Immunity
- Improved Feed-Forward Line Regulation
- Leading Edge Modulation
- 150-μA Typical Start-Up Current
- Low-Power BiCMOS Operation
- Up to 18-V Operation
- Frequency Range 6 kHz to 220 kHz
The UCCx817 and UCCx818 family provides all the functions necessary for active power factor-corrected preregulators. The controller achieves near-unity power factor by shaping the AC input line current waveform to correspond to that of the AC input line voltage. Average current mode control maintains stable, low distortion sinusoidal line current.
Designed in Texas Instrument’s BiCMOS process, the UCCx817 and UCCx818 offers new features such as lower start-up current, lower power dissipation, overvoltage protection, a shunt UVLO detect circuitry, a leading-edge modulation technique to reduce ripple current in the bulk capacitor, and an improved, low-offset (±2-mV) current amplifier to reduce distortion at light load conditions.
