LED驱动电源技术规格初稿

序号 技术指标明细 注   明 评估结果
001 Output Operating Frequency＞=120Hz(不包括调光) 必须满足 
002 Transient Protection shall comply with IEEE C.62.41-1991,
Class A operation. The line transient shall consist of seven
strikes of a 100kHz ring wave, 2.5kV level, for both common
mode and differential mode.
Refer to IEEE C.62.41-1991 Recommended Practice for Surge Voltages in Low-
voltage AC Power Circuits (obsolete)
C.62.41.1.2, C.62.41.2 (new standard) 必须满足 
003 Power supply noise to in Class A sound rating (not exceed 24 dB) 必须满足 
004 Off-state power – luminaires shall not draw power in the off-state  必须满足 
005 输入电压：85-264V（220-240V必须达到，希望达到85-264V）交
流(Transient Protection C.62.41.1.2, C.62.41.2) 必须满足 
006 正常工作时的输出电流 ：
a) 恒流
b) 输出电流0.4 A±5% （六串或七串） 
必须满足
暂定 
007 输出过压保护：具有输出过压保护 必须满足 
008 工作温度：-10℃～+65℃ （散热器温度<65C） 必须满足 
009 效率：>90% PF>0.9 (ANSI C82.77) 必须满足 
010 调光100%-20% （采用市场上兼容的前波段后波段）

 必须满足 
012 EMI (FCC 47 CFR) 必须满足 
013 外形尺寸：（见图纸附件一） 必须满足