资料介绍
If we accept the premise that an embedded engineer is made rather
than born, then how does one go about making a good one? The authors
of this book Exploring C for Microcontrollers: A Hands-on Approach are
certainly “good ones”. Not only do they explore some of the influences
that shaped themselves but they also try to shape “would-be” embedded
engineers. Research and developmental activities in embedded systems
has grown in a significant proportion in the recent past. Embedded software
design is not new to the world, but with the changing time, it
has gained considerable momentum in the recent past, and many young
engineers are strongly inclined to pursue their future in this field. The
book is mainly targeted to these engineers who would like to understand
in great depth the synergetic combination of hardware and software.
The book is divided into eight chapters. Chapter 1 introduces a brief
background about micro-controllers and explains how they are embedded
into products commercially available in the market to emphasize the
importance of these in the daily life of mankind. It also gives an insight
into the architectural details and embedded system concepts for students’
projects to motivate them into this exciting field. The rest of the
book concentrates on software development. The integrated development
environment (IDE) is introduced in Chapter 2. Again the screen shots
and step-by-step procedure will certainly make the students and engineers
fully understand the development process. Chapter 3 differentiates
the embedded C paradigm from the conventional ANSI C. Again
the authors explain how to successfully overcome the memory and time
constraints while developing an embedded C program. Chapter 4 gives
an overview of program development for on-chip resources for MCS51
family of microcontrollers. Chapters 5–8 are devoted to live case studies.
The book has come out with an elegant presentation to aspiring
students and engineers from the teaching experience and technical
knowledge the authors have put over a long time in this field. I strongly
recommend this book for intermediate programmers, electronics, electrical,
instrumentation engineers or any individual who is strongly inclinedto take up his or her career in embedded C programming. I am sure the
reader will experience learning embedded programming by example and
learning by doing. Last but not the least, this book will certainly be a
value addition to the world of embedded programming.
- 针对 C2000™ 微控制器的集成微控制器 (MCU) 电源解决方案数据表
- UM1842_STM32F411VE微控制器探索套件
- UM1879_基于STM32L476VG微控制器的探索套件
- Holtek微控制器应用范例-使用Enhanced Holtek C语言 2次下载
- 32位CMOS微控制器S3C2440A用户手册 0次下载
- 基于微控制器的永磁同步电机磁场定向控制 15次下载
- 系统可编程闪存中的RISC微控制器LGT8XM 0次下载
- USB2.0微控制器CY7C68013的GPIF接口设计资料下载
- AN11153微控制器的设计及开发 5次下载
- C8051F330和C8051F331微控制器的数据手册 15次下载
- 微控制器系统的详细资料概述
- 基于LDOS的TMS320C2834x微控制器电源简化方案 7次下载
- 针对 C2000 微控制器的集成微控制器 (MCU) 电源解决方案 9次下载
- AVR微控制器与C编译器的协同设计 40次下载
- 利用PSD301微控制器外围和微控制器设计智能发送器
- 微控制器与运动控制器的区别 377次阅读
- 微控制器是否能替代PLC 365次阅读
- 微控制器的定义和工作原理 1081次阅读
- 用DS80C51/2微控制器代替Atmel TS80C320U323 884次阅读
- 实时时钟为微控制器系统增加了精确的计时功能 1120次阅读
- I²C接口将小型闪存卡连接到微控制器 802次阅读
- 使用集成的微控制器创建低成本ADC 824次阅读
- 使用uIP堆栈将MAXQ微控制器联网 1051次阅读
- 微控制器的主要应用在哪里 8645次阅读
- digilent开源微控制器介绍 1482次阅读
- 微控制器的相关知识介绍(含义、编程语言) 5138次阅读
- 可编程逻辑在微控制器中起什么关键作用 1583次阅读
- TIMSP430微控制器软件编程经验和应用技巧 4104次阅读
- 微控制器原理及应用 1.4w次阅读
- 《振南电子STM32视频教程》第一讲:ARM处理器和STM32微控制器 2187次阅读
下载排行
本周
- 1HFSS电磁仿真设计应用详解PDF电子教程免费下载
- 24.30 MB | 126次下载 | 1 积分
- 2H桥中的电流感测
- 545.39KB | 7次下载 | 免费
- 3雷达的基本分类方法
- 1.25 MB | 4次下载 | 4 积分
- 4I3C–下一代串行通信接口
- 608.47KB | 3次下载 | 免费
- 5电感技术讲解
- 827.73 KB | 2次下载 | 免费
- 6从 MSP430™ MCU 到 MSPM0 MCU 的迁移指南
- 1.17MB | 2次下载 | 免费
- 7有源低通滤波器设计应用说明
- 1.12MB | 2次下载 | 免费
- 8RA-Eco-RA2E1-48PIN-V1.0开发板资料
- 35.59 MB | 2次下载 | 免费
本月
- 12024年工控与通信行业上游发展趋势和热点解读
- 2.61 MB | 763次下载 | 免费
- 2HFSS电磁仿真设计应用详解PDF电子教程免费下载
- 24.30 MB | 126次下载 | 1 积分
- 3继电保护原理
- 2.80 MB | 36次下载 | 免费
- 4正激、反激、推挽、全桥、半桥区别和特点
- 0.91 MB | 32次下载 | 1 积分
- 5labview实现DBC在界面加载配置
- 0.57 MB | 21次下载 | 5 积分
- 6在设计中使用MOSFET瞬态热阻抗曲线
- 1.57MB | 15次下载 | 免费
- 7GBT 4706.1-2024家用和类似用途电器的安全第1部分:通用要求
- 7.43 MB | 13次下载 | 免费
- 8PADS-3D库文件
- 2.70 MB | 10次下载 | 2 积分
总榜
- 1matlab软件下载入口
- 未知 | 935113次下载 | 10 积分
- 2开源硬件-PMP21529.1-4 开关降压/升压双向直流/直流转换器 PCB layout 设计
- 1.48MB | 420061次下载 | 10 积分
- 3Altium DXP2002下载入口
- 未知 | 233084次下载 | 10 积分
- 4电路仿真软件multisim 10.0免费下载
- 340992 | 191360次下载 | 10 积分
- 5十天学会AVR单片机与C语言视频教程 下载
- 158M | 183329次下载 | 10 积分
- 6labview8.5下载
- 未知 | 81578次下载 | 10 积分
- 7Keil工具MDK-Arm免费下载
- 0.02 MB | 73804次下载 | 10 积分
- 8LabVIEW 8.6下载
- 未知 | 65985次下载 | 10 积分
评论
查看更多