资料介绍
MM54HC190/MM74HC190 Synchronous
Decade Up/Down Counters with Mode
Control MM54HC191/MM74HC191
Synchronous Binary Up/Down Counters
with Mode Control
General Description
These high speed synchronous counters utilize advanced
silicon-gate CMOS technology. They possess the high noise
immunity and low power consumption of CMOS technology,
along with the speeds of low power Schottky TTL.
These circuits are synchronous, reversible, up/down counters.
The MM54HC191/MM74HC191 are 4-bit binary counters
and the MM54HC190/MM74HC190 are BCD counters.
Synchronous operation is provided by having all flip-flops
clocked simultaneously, so that the outputs change simultaneously
when so instructed by the steering logic. This mode
of operation eliminates the output counting spikes normally
associated with asynchronous (ripple clock) counters.
The outputs of the four master-slave flip-flops are triggered
on a low-to-high level transition of the clock input, if the
enable input is low. A high at the enable input inhibits counting.
The direction of the count is determined by the level of
the down/up input. When low, the counter counts up and
when high, it counts down.
These counters are fully programmable; that is, the outputs
may be preset to either level by placing a low on the load
input and entering the desired data at the data inputs. The
output will change independent of the level of the clock input.
This feature allows the counters to be used as modulo-
N dividers by simply modifying the count length with the
preset inputs.
Two outputs have been made available to perform the cascading
function: ripple clock and maximum/minimum count.
The latter output produces a high-level output pulse with a
duration approximately equal to one complete cycle of the
clock when the counter overflows or underflows. The ripple
clock output produces a low-level output pulse equal in
width to the low-level portion of the clock input when an
overflow or underflow condition exists. The counters can be
easily cascaded by feeding the ripple clock output to the
enable input of the succeeding counter if parallel clocking is
used, or to the clock input if parallel enabling is used. The
maximum/minimum count output can be used to accomplish
look-ahead for high-speed operation.
Decade Up/Down Counters with Mode
Control MM54HC191/MM74HC191
Synchronous Binary Up/Down Counters
with Mode Control
General Description
These high speed synchronous counters utilize advanced
silicon-gate CMOS technology. They possess the high noise
immunity and low power consumption of CMOS technology,
along with the speeds of low power Schottky TTL.
These circuits are synchronous, reversible, up/down counters.
The MM54HC191/MM74HC191 are 4-bit binary counters
and the MM54HC190/MM74HC190 are BCD counters.
Synchronous operation is provided by having all flip-flops
clocked simultaneously, so that the outputs change simultaneously
when so instructed by the steering logic. This mode
of operation eliminates the output counting spikes normally
associated with asynchronous (ripple clock) counters.
The outputs of the four master-slave flip-flops are triggered
on a low-to-high level transition of the clock input, if the
enable input is low. A high at the enable input inhibits counting.
The direction of the count is determined by the level of
the down/up input. When low, the counter counts up and
when high, it counts down.
These counters are fully programmable; that is, the outputs
may be preset to either level by placing a low on the load
input and entering the desired data at the data inputs. The
output will change independent of the level of the clock input.
This feature allows the counters to be used as modulo-
N dividers by simply modifying the count length with the
preset inputs.
Two outputs have been made available to perform the cascading
function: ripple clock and maximum/minimum count.
The latter output produces a high-level output pulse with a
duration approximately equal to one complete cycle of the
clock when the counter overflows or underflows. The ripple
clock output produces a low-level output pulse equal in
width to the low-level portion of the clock input when an
overflow or underflow condition exists. The counters can be
easily cascaded by feeding the ripple clock output to the
enable input of the succeeding counter if parallel clocking is
used, or to the clock input if parallel enabling is used. The
maximum/minimum count output can be used to accomplish
look-ahead for high-speed operation.
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- HD74HC190 HD74HC191 数据表 5次下载
- HD74HC190 HD74HC191 数据表 0次下载
- 74HC139N解码器数据手册.PDF 20次下载
- 74HC190英文手册 2次下载
- 74HC190英版数据手册 0次下载
- CD54HC190,CD74HC190,CD54HC191, 18次下载
- 1SS190 pdf datasheet 14次下载
- TC74HC240,TC74HC244/TC74HC241 33次下载
- 74LS190 pdf datasheet 68次下载
- 74HC4049 pdf datasheet 28次下载
- 74HC366 pdf datasheet 13次下载
- 74HC191 pdf datasheet 25次下载
- 74HC74A pdf datasheet 37次下载
- 74hc74 pdf datasheet 155次下载
- 74hc595 pdf 298次下载
- 74hc573怎么使用 74hc573可以仿真吗 1.5w次阅读
- 74HC154的简单介绍 74hc154应用电路图分析 2.1w次阅读
- 74ls190中文资料汇总(74ls190引脚图及功能_工作原理及应用电路) 32.4w次阅读
- 74ls04和74hc04有什么区别_74ls04/74hc04简介 2.5w次阅读
- 电源芯片74HC4953引脚功能(74HC4953内部结构及封装) 4.1w次阅读
- 74hc138中文资料详细(74hc138引脚图及功能表_封装真值表及应用电路图) 28.3w次阅读
- 74hc165级联用法(74hc165级联电路图及程序) 4.9w次阅读
- 74hc165中文资料详细(74hc165工作原理_引脚图及功能_应用电路_逻辑图) 18.5w次阅读
- 用74HC165读8个按键状态 9867次阅读
- 74hc32引脚图及功能 4.7w次阅读
- 74hc245中文资料详细(74hc245管脚功能_工作原理方法_电气特性及应用电路) 5.5w次阅读
- 74hc165和74hc164有何不同_74hc165和74hc164区别 2.9w次阅读
- 74hc595的主要功能(74hc595引脚图及功能_工作原理及电压_典型应用电路) 28.1w次阅读
- 74ls373和74hc573有什么区别 2.5w次阅读
- 74HC04和74HC14的具体区别详解 9.3w次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 11次下载 | 免费
- 3嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 4DIY动手组装LED电子显示屏
- 0.98 MB | 3次下载 | 免费
- 5基于FPGA的C8051F单片机开发板设计
- 0.70 MB | 2次下载 | 免费
- 651单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 751单片机PM2.5检测系统程序
- 0.83 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33566次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21549次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6656次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537798次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420027次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191186次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183279次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论