MIC2580 pdf datasheet (Hot-Swa

The MIC2580 is a hot-swap controller that provides for safe
and orderly insertion and removal of PCI based adapter cards
from a PCI hot-plug compliant system backplane or
CompactPCI™ system.
The MIC2580 incorporates a circuit breaker function that
protects all four supplies (+12V, +5V, +3.3V, and –12V) upon
an overcurrent fault condition. Current foldback limiting prevents
large transient currents caused by plugging adapter
cards into live backplanes, such as in a CompactPCI system.
A programmable slew-rate control limits high inrush currents
to all loads that occur when power is applied to large capacitive
loads.
Voltage supervisory functions for all four power supplies are
provided by “power good” (/PWRGD) and “overcurrent fault”
(/FAULT) diagnostic outputs. Power good and overcurrent
fault include deglitch filters to prevent nuisance tripping.
Power good is active when all four supplies are within
tolerance. Fault (/FAULT) goes active upon overcurrent or
overtemperature conditions. The on-off control input (/ON) is
used to cycle power to the adapter card.