资料介绍
The AD592 is a two terminal monolithic integrated circuit temperature
transducer that provides an output current proportional
to absolute temperature. For a wide range of supply
voltages the transducer acts as a high impedance temperature
dependent current source of 1 mA/K. Improved design and laser
wafer trimming of the IC’s thin film resistors allows the AD592
to achieve absolute accuracy levels and nonlinearity errors previously
unattainable at a comparable price.
The AD592 can be employed in applications between –25°C
and +105°C where conventional temperature sensors (i.e., thermistor,
RTD, thermocouple, diode) are currently being used.
The inherent low cost of a monolithic integrated circuit in a
plastic package, combined with a low total parts count in any
given application, make the AD592 the most cost effective temperature
transducer currently available. Expensive linearization
circuitry, precision voltage references, bridge components, resistance
measuring circuitry and cold junction compensation are
not required with the AD592.
Typical application areas include: appliance temperature sensing,
automotive temperature measurement and control, HVAC
(heating/ventilating/air conditioning) system monitoring, industrial
temperature control, thermocouple cold junction compensation,
board-level electronics temperature diagnostics,
temperature readout options in instrumentation, and temperature
correction circuitry for precision electronics. Particularly
useful in remote sensing applications, the AD592 is immune to
voltage drops and voltage noise over long lines due to its high
impedance current output. AD592s can easily be multiplexed;
the signal current can be switched by a CMOS multiplexer or
the supply voltage can be enabled with a tri-state logic gate.
The AD592 is available in three performance grades: the
AD592AN, AD592BN and AD592CN. All devices are packaged
in a plastic TO-92 case rated from –45°C to +125°C. Performance
is specified from –25°C to +105°C. AD592 chips are
also available, contact the factory for details.
transducer that provides an output current proportional
to absolute temperature. For a wide range of supply
voltages the transducer acts as a high impedance temperature
dependent current source of 1 mA/K. Improved design and laser
wafer trimming of the IC’s thin film resistors allows the AD592
to achieve absolute accuracy levels and nonlinearity errors previously
unattainable at a comparable price.
The AD592 can be employed in applications between –25°C
and +105°C where conventional temperature sensors (i.e., thermistor,
RTD, thermocouple, diode) are currently being used.
The inherent low cost of a monolithic integrated circuit in a
plastic package, combined with a low total parts count in any
given application, make the AD592 the most cost effective temperature
transducer currently available. Expensive linearization
circuitry, precision voltage references, bridge components, resistance
measuring circuitry and cold junction compensation are
not required with the AD592.
Typical application areas include: appliance temperature sensing,
automotive temperature measurement and control, HVAC
(heating/ventilating/air conditioning) system monitoring, industrial
temperature control, thermocouple cold junction compensation,
board-level electronics temperature diagnostics,
temperature readout options in instrumentation, and temperature
correction circuitry for precision electronics. Particularly
useful in remote sensing applications, the AD592 is immune to
voltage drops and voltage noise over long lines due to its high
impedance current output. AD592s can easily be multiplexed;
the signal current can be switched by a CMOS multiplexer or
the supply voltage can be enabled with a tri-state logic gate.
The AD592 is available in three performance grades: the
AD592AN, AD592BN and AD592CN. All devices are packaged
in a plastic TO-92 case rated from –45°C to +125°C. Performance
is specified from –25°C to +105°C. AD592 chips are
also available, contact the factory for details.
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- AD592:低成本、高精度IC温度传感器数据表
- AD592低成本精密ic温度传感器 4次下载
- BF592 pdf datasheet 22次下载
- MAX6033 datasheet pdf
- REF191,datasheet,pdf(Precision
- ADR127,datasheet,pdf(Precision
- ADR130,datasheet,pdf(Precision
- LM34,datasheet,pdf(Precision F
- ad522,pdf datasheet
- CMP04,pdf datasheet (Precision
- 592.pdf 电子管资料数据手册
- CP592 pdf datasheet (Small Sig
- RCA-00-A pdf datasheet
- TL594 pdf datasheet (Precision
- 2N5639 pdf datasheet
- PDF输出时出现错误提醒的解决方案 1185次阅读
- Python中Excel转PDF的实现步骤 787次阅读
- 将PDF文件转换为其他格式文件使用指南 948次阅读
- 万兴PDF密码如何查看列出的权限 835次阅读
- 分享一个快速阅读datasheet的方法 2311次阅读
- PDF文件有哪些特点是什么? 1.1w次阅读
- 如何画出STM32系列单片机的原理图 2.1w次阅读
- 复合放大器实现高精度的高输出驱动能力 获得最佳的性能 1600次阅读
- 如何阅读Datasheet,是作为电子工程师的必备技能! 7837次阅读
- AD9如何简单快速的制作出原理图符号 7441次阅读
- Precision32芯片方案介绍 延续8位MCU优势 1515次阅读
- 使用pdf解析可以用来读取PDF文件中字符串文本,图片数据 1.3w次阅读
- 读Datasheet英文原文的原因分析 4314次阅读
- adc0809中文资料下载 adc0809引脚图封装及应用电路 2w次阅读
- 精密接收机电池低电压报警 (Precision Receiv 3750次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 11次下载 | 免费
- 3嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 4DIY动手组装LED电子显示屏
- 0.98 MB | 3次下载 | 免费
- 5基于FPGA的C8051F单片机开发板设计
- 0.70 MB | 2次下载 | 免费
- 651单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 751单片机PM2.5检测系统程序
- 0.83 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33566次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21549次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6656次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537798次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420027次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191186次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183279次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论
查看更多