资料介绍
This single D-type flip-flop is designed for 1.65-V to 5.5-V VCC operation.
The SN74LVC1G374 features a 3-state output designed specifically for driving highly capacitive or relatively low-impedance loads. This device is particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers.
On the positive transition of the clock (CLK) input, the Q output is set to the logic level set up at the data (D) input.
A buffered output-enable (OE) input can be used to place the output in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the output neither loads nor drives the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
OE does not affect the internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
- SN74LVC1G374-Q1具有3态输出的单D型触发器数据表
- SN54LVC374A,SN74LVC374A D型触发器数据表
- 具有3态输出的单D型触发器SN74LVC1G374 数据表
- SN74LVC1G66-Q1,pdf(Single Bila
- SN74LVC1G66,pdf(Single Bilater
- SN74LVC1G32-Q1,pdf(SINGLE 2-IN
- SN74LVC1G123,pdf(SINGLE RETRIG
- SN74LVC1G17-Q1,pdf(Single Schm
- SN74LVC1G373,pdf(Single D-Type
- SN54LVC374A, SN74LVC374A,pdf(O
- SN74LVC1G374,pdf(SINGLE D-TYPE
- SN74LVC1G34,pdf(Single Buffer
- SN74LVC1G17,pdf(Single Schmitt
- SN74LVC1G126-Q1,pdf(Single Bus
- SN74LVC1G04-Q1,pdf(Single Inve
- 与小数T1和E1接口 1300次阅读
- T1和E1之间的转换 1667次阅读
- 74ls74双d触发器引脚图 74ls74双D触发器功能测试 8.3w次阅读
- 源创通信BPI-D1 开源IP摄像头介绍 2309次阅读
- 浅谈SN74HC541特征应用及设备信息 3570次阅读
- t9900和q9100哪个好 浅谈t9900和q9100的不同 1.4w次阅读
- 74ls374中文资料汇总(74ls374引脚图及功能_工作原理及应用电路) 4.5w次阅读
- TI TAS5404-Q1 26W汽车四路D类放大器参考设计 1722次阅读
- 74ls374中文资料汇总(74ls374引脚图及功能_真值表及特性) 2.8w次阅读
- 74ls197中文资料汇总(74ls197引脚图及功能_逻辑功能及特性) 4.4w次阅读
- 74ls163中文资料汇总(74ls163引脚图及功能_内部结构图及应用电路) 13.4w次阅读
- 74ls151中文资料汇总(74ls151引脚图及功能_工作原理及应用电路) 52.4w次阅读
- 74ls161管脚图引脚图及功能表 27.4w次阅读
- 74hc573使用方法(74hc573引脚图及功能_工作原理_封装尺寸及应用电路) 31.7w次阅读
- 74ls373工作原理是什么 5w次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 11次下载 | 免费
- 3嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 4DIY动手组装LED电子显示屏
- 0.98 MB | 3次下载 | 免费
- 5基于FPGA的C8051F单片机开发板设计
- 0.70 MB | 2次下载 | 免费
- 651单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 751单片机PM2.5检测系统程序
- 0.83 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33566次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21549次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6656次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537798次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420027次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191186次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183279次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论
查看更多