资料介绍
The 256Mb SDRAM is a high speed CMOS, dynamic random-access memory designed to operate in 3.3V Vdd and 3.3V Vddq memory systems containing 268,435,456 bits. Internally configured as a quad-bank DRAM with a synchronous interface. Each 67,108,864-bit bank is organized as 4,096 rows by 512 columns by 32 bits. The 256MbSDRAM includes anAUTOREFRESH MODE, and a power-saving, power-down mode. All signals are registered on the positive edge of the clock signal, CLK. All inputs and outputs are LVTTL compatible. The 256Mb SDRAM has the ability to synchronously burst data at a high data rate with automatic column-address generation, the ability to interleave between internal banks to hide precharge time and the capability to randomly change column addresses on each clock cycle during burst access. A self-timed row precharge initiated at the end of the burst sequenceisavailablewiththeAUTOPRECHARGEfunction enabled. Precharge one bank while accessing one of the other three banks will hide the precharge cycles and provide seamless, high-speed, random-access operation. SDRAM read and write accesses are burst oriented starting at a selected location and continuing for a programmed number of locations in a programmed sequence. The registration of an ACTIVE command begins accesses, followed by a READ or WRITE command. The ACTIVE command in conjunction with address bits registered are used to select the bank and row to be accessed (BA0, BA1 select the bank; A0-A11 select the row)。 The READ or WRITE commands in conjunction with address bits registered are used to select the starting column location for the burst access. Programmable READ or WRITE burst lengths consist of 1, 2, 4 and 8 locations or full page, with a burst terminate option.
- 带有A13 ARM SOC 256MB RAM的嵌入式Linux板-A13-OLinuXino-MICRO 1次下载
- HMI0811(8寸)硬件使用说明书 0次下载
- HMI0711(7寸)硬件使用说明书 0次下载
- ARM8603硬件使用说明书 0次下载
- 74LS256高速的硅栅CMOS器件芯片学习参考手册 15次下载
- 如何使用FPGA实现高速图像存储系统中的SDRAM控制器 13次下载
- EM63A165 SDRAM高速CMOS同步DRAM的数据手册免费下载 4次下载
- SDRAM存储器相关资料下载 49次下载
- 基于TMS320C6201的数字信号处理系统的设计方法 1次下载
- DSP片外高速海置SDRAM存储系统解析 1次下载
- SDRAM接口的VHDL设计方案 57次下载
- 实现256MB超大规模集成电路的关键工艺-RVD法 26次下载
- CAT24C256 256Kb串行CMOS EEPROM数据 53次下载
- SDRAM K4S561632C-TC75 (32MB)介 70次下载
- 昂达主板集成显卡驱动下载 363次下载
- 微雪电子SDRAM模块简介 1198次阅读
- 飞凌嵌入式FCU1101嵌入式控制单元介绍 3453次阅读
- 米尔科技MYD-AM335X-Y开发板 介绍 2045次阅读
- 米尔科技MCC-SAMA5D3X-C核心板简介 2697次阅读
- 天嵌科技TQ2416开发平台-三星系列概述 2453次阅读
- 米尔科技MYD-IMX28X开发板 - IMX283,IMX287开发板简介 4142次阅读
- 米尔科技MYC-IMX28X 核心板 - IMX283,IMAX287核心板简介 4211次阅读
- 盈鹏飞科技SBC-9261嵌入式主板介绍 2104次阅读
- TQ2416开发平台套装 2023次阅读
- 高速CMOS图像传感器的各种类型及应用介绍 7457次阅读
- 基于Xilinx FPGA实现的DDR SDRAM控制器工作过程详解 1.2w次阅读
- DRAM、SDRAM及DDR SDRAM之间的概念详解 9.1w次阅读
- SDRAM工作原理 DRAM控制器系统设计架构 5071次阅读
- DSP片外高速海置SDRAM存储系统设计方案 2032次阅读
- 高速图像处理系统中DDR2-SDRAM接口的设计 5102次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 6次下载 | 免费
- 3100W短波放大电路图
- 0.05 MB | 4次下载 | 3 积分
- 4嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 5基于FPGA的光纤通信系统的设计与实现
- 0.61 MB | 2次下载 | 免费
- 651单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 751单片机大棚环境控制器仿真程序
- 1.10 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33564次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21549次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6653次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537796次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191185次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183279次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论