差分输入双采样3MSPS，12位合成孔径雷达模数转换器AD7356数据表

　　The AD73521 is a dual， 12-bit， high speed， low power， successive approximation ADC that operates from a single 2.5 V power supply and features throughput rates up to 3 MSPS. The part contains two ADCs， each preceded by a low noise， wide bandwidth track-and-hold circuit that can handle input frequencies in excess of 110 MHz. The conversion process and data acquisition use standard control inputs allowing for easy interfacing to microprocessors or DSPs. The input signal is sampled on the falling edge of CS; and a conversion is also initiated at this point. The conversion time is determined by the SCLK frequency. The AD7352 uses advanced design techniques to achieve very low power dissipation at high throughput rates. With a 2.5 V supply and a 3 MSPS throughput rate， the part consumes 10 mA typically. The part also offers a flexible power/throughput rate management options. The analog input range for the part is the differential commonmode ±VREF/2. The AD7352 has an on-chip 2.048 V reference that can be overdriven when an external reference is preferred. The AD7352 is available in a 16-lead thin shrink small outline package （TSSOP）