资料介绍
The ADM1075 is a full feature, negative voltage, hot swap control-ler with constant power foldback and high accuracy digital current and voltage measurement that allows boards to be safely inserted and removed from a live −48 V backplane. The part provides precise and robust current limiting and protection against both transient and nontransient short circuits and overvoltage and undervoltage conditions. The ADM1075 typically operates from a negative voltage of −35 V to −80 V and, due to shunt regulation, has excellent voltage transient immunity. The operating range of the part is flexible due to the shunt regulator, and the part can be powered directly by a 10 V rail to save shunt power dissipation (see the Powering the ADM1075 section for more details)。
A full-scale current limit of 25 mV or 50 mV can be selected by choosing the appropriate model. The maximum current limit is set by the combination of the sense resistor, RSENSE, and the input voltage on the ISET pin, using external resistors. This allows fine tuning of the trip voltage so that standard sense resistors can be used. Inrush current is limited to this programmable value by controlling the gate drive of an external N-channel FET. A built-in soft start function allows control of the inrush current profile by an external capacitor on the soft start (SS) pin.
An external capacitor on the TIMER pin determines the maxi-mum allowed on-time for when the system is in current limit. This is based on the safe operating area (SOA) limits of the MOSFET. A constant power foldback scheme is used to control the power dissipation in the MOSFET during power-up and fault conditions. The ADM1075 regulates the current dynami-cally to ensure that the power in the MOSFET is within SOA limits as VDS changes. After the timer has expired, the device shuts down the MOSFET. The level of this power, along with the TIMER regulation time, can be set to ensure that the MOSFET remains within the SOA limits.
- –48V 高性能热插拔控制器TPS23521数据表
- –48V 热插拔and Dual OR-ing控制器TPS23525数据表
- –48V 热插拔and Single OR-ing控制器TPS23523数据表
- LTC4253/LTC4253A:-48V带Sequencer的热插拔控制器数据表
- ADM1178:热插拔控制器和数字电源监视器,带ALERTB输出数据表
- ADM1073:全功能-48 V热插拔控制器数据表
- ADM1176:热插拔控制器和I<sup>2</sup>C电源监视器数据表
- ADM1293/ADM1294:带PMBus接口的数字电源监视器初步数据表
- ADM1278:带PMBus接口的热插拔控制器和数字功率电能监控器数据表
- LTC4235:双12V理想二极管或单热插拔控制器,带电流监视器数据表
- ADM1272:带PMBus数据表的高压热插拔控制器和数字电源监控器
- ADM1275:带PMBus接口的热插拔控制器和数字电源监视器产品手册
- LTC4253A-ADJ:-48V带Sequencer的热插拔控制器数据表
- LTC4253B:-带Sequencer数据表的48V热插拔控制器
- ADM1070:-48 V热插拔控制器数据表
- 正高压热插拔控制器电路图 502次阅读
- 正低压热插拔控制器电路图 541次阅读
- HYM1422热插拔控制器电路图 510次阅读
- 简单的热插拔控制器电路图 623次阅读
- 了解热插拔:热插拔电路设计过程示例 1545次阅读
- 最小化热插拔控制器输出短路时的短路电流幅度和脉冲宽度 986次阅读
- 了解、使用和选择热插拔控制器 1898次阅读
- 具有上电超时功能的热插拔控制器简化了具有多个电源的热插拔板 1479次阅读
- 48V热插拔解决方案可确保对输入电压瞬变的抗扰度 2083次阅读
- 汽车和电信应用的功率监视器包括ADC和I2C接口 758次阅读
- 汽车和电信应用的功率监视器包括ADC和I2C接口 735次阅读
- 热插拔控制器改善了电源排序 783次阅读
- 如何使用MAX4928切换显示端口热插拔检测信号 691次阅读
- 48V电源系统中的GaN FET应用 754次阅读
- 35V 可热插拔的超级电容器后备电源控制器提供不间断电源、保护和监视 5868次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 6次下载 | 免费
- 3100W短波放大电路图
- 0.05 MB | 4次下载 | 3 积分
- 4嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 5基于FPGA的光纤通信系统的设计与实现
- 0.61 MB | 2次下载 | 免费
- 651单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 751单片机大棚环境控制器仿真程序
- 1.10 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33564次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21549次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6653次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537796次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191185次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183279次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论
查看更多