电子发烧友App

硬声App

0
  • 聊天消息
  • 系统消息
  • 评论与回复
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心

完善资料让更多小伙伴认识你,还能领取20积分哦,立即完善>

3天内不再提示
电子发烧友网>电子资料下载>嵌入式开发>数据记录功能的无线温度监控器

数据记录功能的无线温度监控器

2017-10-31 | rar | 0.10 MB | 次下载 | 免费

资料介绍

  In Figure 2, the MAX1470 is the ASK receiver and demodulates the signal at the corresponding carrier frequency. The

  output signal‘s frequency is measured with a frequency counter. The configured scalar multiplier is 1K/Hz when TS1 is

  connected to GND and TS0 connected to VDD. This scalar multiplier is configurable with pins TS1 and TS0 (Figure 1)。

  The MAX9075 is a comparator connected to the MAX1470’s RSSI with internal peak detector pin. The external RC

  follows the peak power of the received signal. This is compared with a predetermined voltage level generated by a

  resistor voltage divider. Lab experiments show that a threshold of approximately 1.57V generates a valid output on the

  DATAOUT pin without receiving false readings. Adjust this threshold to the proper level for optimal performance. The

  comparator‘s output is low when a weak or invalid signal is received and high when the received signal is adequate.

  Next the MAXQ2000, a MAXQ-based microcontroller, measures the signal frequency and displays the value using its

  integrated timer/counters and LCD driver peripherals. A counter tracks the number of rising-edge transitions on the input

  temperature signal, while a timer tracks the elapsed time. After the timer’s 1-second period elapses, an interrupt occurs.

  At this moment, the counter value is read, converted to Celsius, and displayed on the LCD. Next, the counter is reset to

  0 to restart the process. The timer is automatically reloaded once the timer interrupt occurs. The resulting temperature is

  also output by UART0. A handheld frequency counter is used to verify the temperature reading.

  The microcontroller monitors the signal power through P6.0, configured as a general-purpose input pin. When the input is

  logic low, the LCD and UART output will be “no RF” to alert the user of possible transmitter issues when the transmitter

  and receiver pair is separated by too great a distance.

  The LCD connection follows the design in the MAX2000 evaluation (EV) kit. To ensure that the display enables the

  correct segments, the internal mapping of the display‘s seven A-to-G segments needs to be preserved. A lookup table in

  the data segment of the assembly code is used for this purpose. By adding an RS-232 level converter, the UART output

  can send data to a data-logging device such as a computer.

带数据记录功能的无线温度监控器

下载该资料的人也在下载 下载该资料的人还在阅读
更多 >

评论

查看更多

下载排行

本周

  1. 1TC358743XBG评估板参考手册
  2. 1.36 MB  |  330次下载  |  免费
  3. 2开关电源基础知识
  4. 5.73 MB  |  6次下载  |  免费
  5. 3100W短波放大电路图
  6. 0.05 MB  |  4次下载  |  3 积分
  7. 4嵌入式linux-聊天程序设计
  8. 0.60 MB  |  3次下载  |  免费
  9. 5基于FPGA的光纤通信系统的设计与实现
  10. 0.61 MB  |  2次下载  |  免费
  11. 6基于FPGA的C8051F单片机开发板设计
  12. 0.70 MB  |  2次下载  |  免费
  13. 751单片机窗帘控制器仿真程序
  14. 1.93 MB  |  2次下载  |  免费
  15. 8基于51单片机的RGB调色灯程序仿真
  16. 0.86 MB  |  2次下载  |  免费

本月

  1. 1OrCAD10.5下载OrCAD10.5中文版软件
  2. 0.00 MB  |  234315次下载  |  免费
  3. 2555集成电路应用800例(新编版)
  4. 0.00 MB  |  33564次下载  |  免费
  5. 3接口电路图大全
  6. 未知  |  30323次下载  |  免费
  7. 4开关电源设计实例指南
  8. 未知  |  21548次下载  |  免费
  9. 5电气工程师手册免费下载(新编第二版pdf电子书)
  10. 0.00 MB  |  15349次下载  |  免费
  11. 6数字电路基础pdf(下载)
  12. 未知  |  13750次下载  |  免费
  13. 7电子制作实例集锦 下载
  14. 未知  |  8113次下载  |  免费
  15. 8《LED驱动电路设计》 温德尔著
  16. 0.00 MB  |  6653次下载  |  免费

总榜

  1. 1matlab软件下载入口
  2. 未知  |  935054次下载  |  免费
  3. 2protel99se软件下载(可英文版转中文版)
  4. 78.1 MB  |  537796次下载  |  免费
  5. 3MATLAB 7.1 下载 (含软件介绍)
  6. 未知  |  420026次下载  |  免费
  7. 4OrCAD10.5下载OrCAD10.5中文版软件
  8. 0.00 MB  |  234315次下载  |  免费
  9. 5Altium DXP2002下载入口
  10. 未知  |  233046次下载  |  免费
  11. 6电路仿真软件multisim 10.0免费下载
  12. 340992  |  191185次下载  |  免费
  13. 7十天学会AVR单片机与C语言视频教程 下载
  14. 158M  |  183278次下载  |  免费
  15. 8proe5.0野火版下载(中文版免费下载)
  16. 未知  |  138040次下载  |  免费