The EV-COG-AD4050WZ (referred also as MCU Cog) is a development platform based on the industry leading ultra low power ADuCM4050 32-bit ARM Cortex™-M4F microcontroller. The platform is designed to be a development and prototyping vehicle to get customer ideas from concept to production with a minimal risk and faster time to market.
Applications using EV-COG-AD4050WZ board can be developed using one of the following toolchains.

1. Crosscore Embedded Studio 2.7.0 and above - an Eclipse based Analog Devices Interactive Development Environment.
2. IAR Embedded Workbench for ARM 8.20 and above
3. Keil uVision 4 and above
4. ARM mbed Compiler

Make sure a valid license for the selected toolchain is installed before using EV-COG-AD4050WZ board.

The software and power measurement is same for both EV-COG-AD4050WZ and EV-COG-AD4050LZ

1. Introduction
   
2. Software Packs & Board Support Package:EV-COG-AD4050WZ software architecture is categorized into 2 groups as below.
   
   1. Analog Devices ADuCM4x50 Device Support
   2. Analog Devices EV-COG-AD4050 Off-Chip Drivers and Examples
3. QuickStart Guide
   
   1. EV-COG-AD4050WZ with CrossCore Embedded Studio
   2. EV-COG-AD4050WZ with IAR Embedded Workbench for ARM
4. Hardware Details
   1. EV-COG-AD4050WZ MCU Cog
      
      • Power Measurement on EV-COG-AD4050WZ MCU COG
        
5. Development Tools & Driver
   1. CrossCore Embedded Studio Download & Install
      
      • CrossCore Embedded Studio Quickstart Userguide
        
   2. Driver installation for on-board debugger (CMSIS-DAP)
      
6. Example Project
   
7. Help & Support