资料介绍
AD-FMCOMMS3-EBZ User Guide
The AD-FMComms3-EBZ is an FMC board for the AD9361, a highly integrated RF Agile Transceiver™. While the complete chip level design package can be found on the the ADI web site. Information on the card, and how to use it, the design package that surrounds it, and the software which can make it work, can be found here.
The purpose of the AD-FMComms3-EBZ is to provide an RF platform to software developers, system architects, etc, who want a single platform which operates over a much wider tuning range (70 MHz – 6 GHz). It’s expected that the RF performance of this platform can meet the datasheet specifications at 2.4 GHz, but not at the entire RF tuning range that the board supports (but it will work much better than the AD-FMCOMMS2-EBZ over the complete RF frequency). We will provide typical performance data for the entire range (70 MHz – 6 GHz) which is supported by the platform. This is primarily for system investigation and bring up of various waveforms from a software team before their custom hardware is complete, where they want to see waveforms, but are not concerned about the last 1dB or 1% EVM of performance.
The AD-FMComms3-EBZ board is very similar to the AD-FMComms2-EBZ board with only one exception, the RX/TX RF differential to single ended transformer. The AD-FMComms3-EBZ is more targetted for wider tuning range applications, that is why we use the TCM1-63AX+ from Mini-Circuits as the RF transformer of choice. We affectionately call the FMCOMMS3-EBZ the “Software Engineers” platform, and the FMCOMMS2-EBZ, the “RF Engineers” platform to denote the difference.
- FMCOMMS3 Hardware: This provides a brief description of the AD-FMCOMMS3-EBZ board by itself, and is a good reference for those who want to understand a little more about the board. If you just want to use the board, you can skip this section, and come back to it when you want to incorporate the AD9361 into your product.
- Hardware (including schematics)
- Use the AD-FMCOMMS3-EBZ Board to better understand the AD9361
-
- Linux Applications
- Push custom data into/out of the AD-FMCOMMS3-EBZ
- Design with the AD9361
-
- Simulation
- Hardware in the Loop / How to design your own custom BaseBand
-
- FM Radio/Tuner (listen to FM signals on the HDMI monitor)
- Targeting
- Complete Workflow
- Design a custom AD9361 based platform
-
- HDL Reference Design which you must use in your FPGA.
-
-
- Additional Documentation about SDR Signal Chains
Warning
All the products described on this page include ESD (electrostatic discharge) sensitive devices. Electrostatic charges as high as 4000V readily accumulate on the human body or test equipment and can discharge without detection.
Although the boards feature ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. This includes removing static charge on external equipment, cables, or antennas before connecting to the device.
- AD-FMCADC3-EBZ用户指南
- AD-FMCOMMS6-EBZ用户指南
- AD-FMCOMMS1-EBZ用户指南
- UG-1460:AD9671EBZ评估板用户指南
- AD-FMCOMMS4-EBZ用户指南
- AD-FMCOMMS2-EBZ用户指南
- UG-1372:EVAL-ADM3055EBZ用户指南
- AD-FMCDAQ2-EBZ用户指南
- EVAL-ADM2563EBZ/EVAL-ADM2863EBZ用户指南(UG-1779)
- ADS8-V1EBZ评估板用户指南
- AD-FMCOMMS11-EBZ用户指南
- EVAL-CN0522-EBZ用户指南
- AD-FMCOMMS8-EBZ用户指南
- EVAL-CN0533-EBZ用户指南
- ADS8-V3EBZ用户指南
- CD100M满杯检测方案的安装指南 240次阅读
- 5G SA用户打电话回落3G的问题处理 972次阅读
- 滤波器设计指南 2097次阅读
- AN-1006:使用 EVAL-ADUSB2EBZ 1170次阅读
- T3和E3网络接口布局指南 1899次阅读
- 使用ICAP在SPI模式下执行Spartan-3AN多重启动 676次阅读
- 为什么电子指南针能指示方向 1629次阅读
- 使用含快速开关SiC器件的RC缓冲电路实用解决方案和指南 2531次阅读
- PCB设计之五个EMI设计指南 3397次阅读
- 5G时代到来,各个国家的2G/3G也将开始“退休” 754次阅读
- 米尔科技ARM Cortex-M3教程指南 2628次阅读
- 一文知道UltraFast嵌入式设计方法指南 2453次阅读
- iPhone自带的指南针的妙用 7562次阅读
- 基于FPGA的DDR3 SDRAM控制器用户接口设计 3537次阅读
- 八维度精确定位用户需求 有效提升3G流量 687次阅读
下载排行
本周
- 1电子电路原理第七版PDF电子教材免费下载
- 0.00 MB | 1491次下载 | 免费
- 2单片机典型实例介绍
- 18.19 MB | 95次下载 | 1 积分
- 3S7-200PLC编程实例详细资料
- 1.17 MB | 27次下载 | 1 积分
- 4笔记本电脑主板的元件识别和讲解说明
- 4.28 MB | 18次下载 | 4 积分
- 5开关电源原理及各功能电路详解
- 0.38 MB | 11次下载 | 免费
- 6100W短波放大电路图
- 0.05 MB | 4次下载 | 3 积分
- 7基于单片机和 SG3525的程控开关电源设计
- 0.23 MB | 4次下载 | 免费
- 8基于AT89C2051/4051单片机编程器的实验
- 0.11 MB | 4次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 2PADS 9.0 2009最新版 -下载
- 0.00 MB | 66304次下载 | 免费
- 3protel99下载protel99软件下载(中文版)
- 0.00 MB | 51209次下载 | 免费
- 4LabView 8.0 专业版下载 (3CD完整版)
- 0.00 MB | 51043次下载 | 免费
- 5555集成电路应用800例(新编版)
- 0.00 MB | 33562次下载 | 免费
- 6接口电路图大全
- 未知 | 30320次下载 | 免费
- 7Multisim 10下载Multisim 10 中文版
- 0.00 MB | 28588次下载 | 免费
- 8开关电源设计实例指南
- 未知 | 21539次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935053次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537793次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191183次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183277次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138039次下载 | 免费
评论
查看更多