SDP-H1用户指南

The SDP-H1 is used as part of the evaluation system for many ADI components. the SDP-H1 board is designed to be used in conjunction with various ADI component evaluation boards as part of a customer evaluation environement.The SDP provides USB connectivity through a USB 2.0 high speed connection to the computer allowing users to evaluate components on this platform from a PC application. The SDP-H1 has a Xilinx(R) Spartan®-6 FPGA and a ADSP-BF527 Blackfin processor. It has an Low Pin Count (LPC) FMC connector and a 120 pin connector identical to that found on the SDP-B and SDP-S.

Getting Started - provides software and hardware installation procedure, PC system requirements and basic board information.

Hardware Description - provides information on the EVAL-SDP-CH1Z components

Schematics - provides schematics and other hardware documents

This board features :

• Xilinx Spartan(R)-6 FPGA
• DDR2
  • Micron MT47H32M16Hr-25E:G -8Mb x 16 bits x 4 Banks(512 Mb/64Mb)
• SRAM
  • ISSI IS61WV25616BLL-10BLI – 256Kb x 16 bits (4 Mb/512 Kb)
• 1 x 160 pin FMC-LPC Connector (See VITA 57 Specification)
  • Samtec ASP-134603-01
  • Up to 1,080 Mb/s LVDS
  • Single Ended LVCMOS
  • Power
• Analog Devices ADSP-BF527 Blackfin processor
  • Core performance up to 600 MHz
  • 208 -ball CSP-BGA package
  • 24 MHz CLKIN oscillator
• 32Mb flash memory
  • Numonyx M29W320EB or
  • Numonyx M25P32
• SDRAM memory
  • Micron MT48LC16M16A2P-6A - 16 Mb x 16 bits (256 Mb/32 MB)
• 2 x 120-pin small foot print connectors
  • Hirose FX8-120P-SV1(91),120 Pin Header
• Blackfin processor peripherals exposed
  • SPI
  • SPORT
  • TWI/I2C
  • GPIO
  • PPI
  • Asynchronous Parallel

For more information, go to The ADI web site.